D-Link DES-3225G - Manual (Page 99)

24-port NWay Ethernet Switch User’s Guide
Using the Console Interface 89
♦ Total RX The number of bytes received, good and bad.
♦ Unicast RX/Unicast TX The number of good unicast frames received and sent. This includes dropped unicast
packets.
♦ Multicast RX/Multicast TX The number of good multicast frames received and sent. This includes local and
dropped multicast packets.
♦ Broadcast RX/Broadcast TX The number of good broadcast frames received and sent. This includes dropped
broadcast packets.
Browse Address Table
The Browse Address Table allows the user to view which Switch port(s) a specific network device uses to communicate
on the network. You can sort this table by MAC address, port, or VLAN. This is useful for viewing which ports one device is
using, or which devices are using one port.
To display the Browse Address Table, choose Network Monitoring from the main menu and then choose Browse
Address Table . The following screen appears:
Figure 6-60. Browse Address Table
To browse by MAC address, select MAC address in the Search by field, enter the desired MAC address in the next field,
and then press FIND.
To browse by port number, select Port in the Search by field, enter the desired port in the next field, and then press FIND.
To browse by VLAN, select VLAN in the Search By field, enter the desired VLAN in the next field, and then press FIND.