D-Link DES-3225G - Manual (Page 103)

24-port NWay Ethernet Switch User’s Guide
Using the Console Interface 93
Figure 6-64. Switch History screen
The switch history entries are listed sequentially from the last time the Switch was rebooted. Use the following keys to
move around the screen above: N – Page down, P – Page up, B – Begin, E – End, and C – Clear Log. CTRL+R will refresh
the screen.
Resetting the Switch
You can use the console interface to reset the Switch, either performing a Restart System (which restarts the Switch
and is identical to powering the Switch off and on again), or a Factory Reset (which sets all of the Switch’s parameters
to what they were when the Switch was purchased).
Restart System
To perform a system reset, choose Restart System from the main menu--a confirmation query will be offered before the
system is rebooted.