D-Link DES-3225G - Manual (Page 166)

24-port NWay Ethernet Switch User’s Guide
156 Runtime Switch Software Default Settings
D D
R
UNTIME
S
WITCH
S
OFTWARE
D
EFAULT
S
ETTINGS
Load Mode Ethernet
Configuration update Disable
Firmware update Disable
Out-of-band baud rate 9600
RS232 mode Console
IP address 0.0.0.0
Subnet mask 0.0.0.0
Default router 0.0.0.0
BootP service Enable
TFTP server IP address 0.0.0.0
IGMP time out 300 secs
IGMP capture state Disable
Partition mode Enable
Address table lock Disable
Device HOL Enable
Port HOL Enable
Console time out 15 min
User name Blank
Password Blank
Device STP Disable
Port STP Enable
Port enable Enable
Bridge max age 20 secs
Bridge hello time 2 sec
Bridge forward delay 15 sec
Bridge priority 32768
Port STP cost 19 (Gigabit=4)
Port STP priority 128
Forwarding table aging time 300 secs
Address lookup mode Level 1
NWay Enable`
Flow control Enable
Backpressure Disable
Port lock Disable
Port priority Default
Broadcast storm rising action Do nothing
Broadcast storm falling action Do nothing
Broadcast storm rising threshold 500pkts/sec
Broadcast storm falling threshold 250pkts/sec
Community string “public”, “private”
VLAN mode Basic
SNMP VLAN(802.1Q) 1
Default port VID 1
Ingress rule checking Disable
Mirror src port <->target port 1ß2
Mirror Disable