D-Link DES-3225G - Manual (Page 134)

24-port NWay Ethernet Switch User’s Guide
124 Web-Based Network Management
Traps and Community Strings
Figure 7-26. Traps and Community Strings window
To use the functions on this window, enter the appropriate SNMP information in the Community Strings and Trap
Receiving Stations sections--you may enter up to four entries in each section. A trap receiving station is a device that
constantly runs a network management application to receive and store traps. Then click Apply to put the settings
into effect.
The Community Strings information is described as follows:
♦ SNMP Community String A user-defined SNMP community name.
♦ Access Right The permitted access of Read-Only or Read-Write using the SNMP community name.
♦ Status Option to set the current community string to Valid or Invalid.
The Trap Receiving Stations information is described as follows:
♦ IP Address The IP address of the trap receiving station.
♦ Status Option to set the trap receiving station to Enabled or Disabled.
♦ Community String A user-defined SNMP community name.