D-Link DES-3225G - Manual (Page 41)

24-port NWay Ethernet Switch User’s Guide
Using the Console Interface 31
In order to retain any modifications made in the current session by saving them into the NV-RAM, it is necessary to choose
Save Changes from the main menu. The following screen will appear to indicate your new settings have been processed:
Figure 6-4. Save Changes screen
After the settings have been saved to NV-RAM, they will become the default settings for the switch, and they will be used
by the switch every time it is powered on, reset or rebooted. The only exception to this is a factory reset, which will clear all
settings and restore them to their initial values listed in Appendix D, which were present when the switch was purchased.
Logging Onto The Switch Console By Registered Users
To log in once you have created a registered user,
1. Type in your Username and press .
2. Type in your Password and press .
3. The main menu screen will be displayed based on your Administrator or Normal User access level or privilege.
Create/Modify User Accounts
To add or change your user password:
Choose Users Accounts Management from the main menu. The following User Accounts Management
menu appears: