Hoefer IEF100 - Manual (Page 8)

• p2
Specifications
Capacity using
Single Electrode set
1– 6 IPG strips 7 to 24 cm long
Capacity using
Dual Electrode accessory
2– 12 IPG strips 7 cm long
Output Volt 12,000 V
Current 10 mA
Power 10 W
Power in 100 – 240 V
50 – 60 Hz
100 W
User interface Large blue/white graphical display
Knob
7 button keypad
Platform temperature 15 – 25 °C
Protocol capacity 30 programs with 9 steps each
Input/output ports Ethernet, RS232
Dimension (w × d × h) 38 cm × 27 cm × 19 cm
Weight 8 kg
Environmental Indoor use 4 – 40 °C
operating conditions Humidity up to 80%
Altitude up to 2000 m
Installation category II
Pollution degree 2
Product certifications EN61010-1:2001,
EN61326:1998, CE, WEEE, RoHS
This declaration of conformity is only
valid for the instrument when it is:
• used in laboratory locations,
• used as delivered from Hoefer, Inc.
except for alterations described in the
user manual, and
• connected to other CE-labeled instru-
ments or products recommended or
approved by Hoefer, Inc.