Hoefer IEF100 - Manual (Page 18)

• p12
Edit Protocol Screen
From the main menu, use the knob to highlight the desired protocol.
Press the button beneath EDIT on the screen. The IEF100 will now
display the edit protocol screen (Fig. 11).
All IEF parameters are displayed on one screen. Each protocol can be
programmed with up to nine steps. The protocol ends with the first
step that has a step time of zero.
Use the knob to move between the following editable fields. Once
highlighted, click the knob to change the value of the field.
Protocol Number
Click the knob. The knob will now cycle through the 30 protocols,
allowing a quick review of each protocol.
Protocol Name
Protocol names can have up to 16 alphanumeric symbols.
The following symbols are available:
A B C D E F G H I J K L M N O P Q R S T U V W X Y Z
% . @ / - + m u n 0 1 2 3 4 5 6 7 8 9
Highlight the protocol name field, and click the knob.
A cursor will cause the first character to blink. Turn the knob to scroll
through the above symbols. Once the desired symbol is reached, use
the horizontal arrows (the keys directly beneath the knob) to move the
cursor to the next position. Repeat until the protocol name is correct.
The “blank space” is between the lower case “n” and the “0” symbols.
Fig. 11. Edit protocol screen. All
parameters for an entire protocol
are viewable on one screen.