Hoefer IEF100 - Manual (Page 38)

• p32
In the example below 6 IPG strips are being focused according
to protocol 7, a maximum of 0.5 W/strip and 100,000 volt-hour
endpoint (Fig. 34).
The protocol is in the third step. The protocol has been running for
4 hours and 24 minutes, or 19,108 volt-hours. Currently, the protocol
is 1 hour and 2 minutes and 12,088 volt-hours, into step 3.
The internal power supply is delivering 11,574 volts, a total of
156 μA and 1.8 watts across six IPG strips.
During a run different strips may control the overall voltage as the
resistance of the strips changes during the run.
Fig. 34. Run screen.