Hoefer IEF100 - Manual (Page 12)

• p6
STOP Button
Immediately stops the IEF, and terminates the protocol.
LCD Display
The large blue/white display simplifies the interface, and displays
graphical IEF results.
Function Keys
The function of these keys is shown on the display directly above the
key. The function varies depending on what screen is active.
Ethernet Port/RS232 Port
These two ports can be used to download IEF data from the
instrument and transfer protocols.
Air Flow
Fans pull air in through the side vents, and blow air out the rear
vents. The air cools the electronic components, and helps the Peltier
modules maintain constant temperature.
Mains Power
The power entry module operates at all volts and frequencies.
Leveling Feet/Bubble Level
The leveling feet and the bubble level can be used to level the IEF
platform. A level instrument will help ensure oil completely covers
the IPG strips.
Air Out Vents
Power Entry
Module ON/OFF
Switch Air In Vents
(2X)
Fig. 5. Rear panel.
Leveling Feet
Note: The vents should not be blocked.