Hoefer IEF100 - Manual (Page 46)

• p40
HyperTerminal Commands
The HyperTerminal program communicates with the IEF100 by trans-
mitting one line of data at a time.
Multiple lines can be typed and sent together. Type each line perfectly
the first time, and press enter, for the command to be successfully
loaded into the IEF100. All commands are case sensitive. Correcting
typographical errors in a line of data using the backspace and delete
keys will not result in successful communication.
The first command to type in HyperTerminal should be “AT” and
enter. A good connection is verified with the word OK returning in
the HyperTerminal window.
Examples of protocols are given at the end of Appendix A. These can
be cut and pasted to help with the line formatting.
A subset of useful HyperTerminal commands are given on the follow-
ing page.