beautypg.com

Hoefer IEF100 User Manual

Page 42

background image

• p36

Serial Port Configuration

1

Select a Com Port (Fig. 38). This is the computer port to communicate
directly with the IEF100. Choose TCP/IP if connecting via the
ethernet connection.

2

Set the baud rate to the same as the IEF100, 9600, 38400 or 57600
and 8 data bits, no parity, 1 stop bit, hardware flow control (Fig. 39).

Fig. 38. Select a Com Port.

Fig. 39. Set the baud rate.

See also other documents in the category Hoefer Equipment: