Hoefer IEF100 - Manual (Page 48)

• p42
Care and Maintenance
Turn the mains power switch off and unplug the power cord
before cleaning.
Instrument and Lid
• Use a soft cloth dampened with water or a mild cleaning solution to
clean the cabinet and display.
• If spilled liquids contact the circuit boards, unplug the IEF100 and
allow to dry completely. Call Hoefer, Inc. for advice before using.
Cleaning the Tray and Electrodes
• A detergent designed to remove oil is recommended, followed by
mild, nonionic laboratory cleaning reagents. Rinse tray well with
deionized water and dry completely before use.
• The platinum wire on the electrodes is fragile and should be cleaned
very gently. The electrodes should not be soaked in solution.
Technical Service and Repair
Hoefer, Inc. offers complete technical support for all of our
products. If you have any questions about how to use this product,
or would like to arrange to repair it, please call or fax your local
Hoefer, Inc. representative.