Harken 7411.11 1/2 MKIV Jib Reefing & Furling - Manual (Page 4)

Preassembly Parts
Main Components
Torque Tube
Assembly
Halyard Swivel
2' (610 mm)
Bottom Foil
7' (2.13 m)
Foils
Flange Assembly
Cover Assembly
Guard Assembly
Part No.
Description Unit 1 Unit 2 Unit 3-3/4 Unit 3-7/8 Qty
Halyard swivel H-39812 H-39794 H-39392 H-39392 1
Torque Tube Assembly HFG927 HFG928 HFG929 HFG929 1
Hub Assembly HFG923 HFG924 HFG925 HFG926 1
Cover Assembly HFG683 HFG686 HFG689 HFG689 Pair
Flange Assembly HFG684 HFG687 HFG690 HFG690 Pair
Guard Assembly HFG685 HFG688 HFG691 HFG691 Pair
Unit Forward Ø
Min Break
Strength Aft Ø
1 1 / 4 " (6 mm) 2500 lb (1130 kg) 5 / 16 " (8 mm)
2 5 / 16 " (8 mm) 3740 lb (1700 kg) 3 / 8 " (10 mm)
3 3 / 8 " (10 mm) 5000 lb (2270 kg) 7 / 16 " (12 mm)
Line Specifications
Line (Not included with Furler)
Note: Line is not included with furler. Drum of
unit is smaller to allow it to fit into narrow bow
sections. If overlapping sails are used, standard
diameter line will fill up drum and jam furler. To
prevent this, use small diameter, high strength
line at forward end and have a rigger add a
cover at aft end where line is handled.
Description Unit Part No. Qty
7' (2.13 m) Foil
1
7411.30 6
2' (610 mm) Bottom foil 7411.33 1
7' (2.13 m) Foil
2
7412.30 8
2' (610 mm) Bottom foil 7412.33 1
7' (2.13 m) Foil
3
7413.30 10
2' (610 mm) Bottom foil 7413.33 1
Foils (Standard Package)
Hub Assembly
4 MKIV Underdeck Unit 1, 2, 3