Guralp Systems CMG-DM24 - Manual (Page 86)

CMG-DM24
•
COMPLETE, to download all events currently held in Flash
memory.
•
yyyy mm dd hh mm SEARCH, to look for events in the 10-
minute period containing yyyy mm dd hh mm, e.g.
2005 12 26 04 13 SEARCH EVENTS
will download events between 04:10 and 04:20 on the 26 th of
December, 2005. The time format is the same as for FROM-TIME
and TO-TIME, as documented in section 5.10, page 85.
If an event occurs, but nothing is filed (e.g. because the digitizer
is in DIRECT mode), it will be listed with the message No File.
•
two numbers event-id number-of-events, to download
number-of-events starting at event number event-id. You
can find out event-id using the command EVENTSLIST
(described on page 78). Thus, if EVENTSLIST returns
# 7 Filed @ 63,772 PLPGG SBHYZG 2006 1 4 16:07:50
# 8 Filed @ 63,812 PLPGG SBHYZG 2006 1 4 16:22:24
# 9 Filed @ 63,952 PLPGG SBHYZG 2006 1 5 10:14:59
# 10 Filed @ 64,005 PLPGG SBHYZG 2006 1 5 10:16:49
# 11 Filed @ 64,039 PLPGG SBHYEG 2006 1 5 10:17:45
you can instruct the digitizer to download these 5 events with
the command
7 5 EVENTS
Once you have specified the events to be downloaded, issuing
DOWNLOAD will make the DM24 begin downloading data as soon as
your terminal session is ended.
GO
Syntax: GO
Closes terminal mode, and begins the download you have set up. You
can pause the download by re-entering terminal mode, and restart
with another GO or abort with END-DOWNLOAD.
Once the download has completed, the DM24 will carry on
transmitting real-time data, if you have so configured it.
86 Issue N