Guralp Systems CMG-DM24 - Manual (Page 66)

CMG-DM24
0 SETDSS
5.6 Triggering
TRIGGERS
Syntax: components TRIGGERS
Selects which component or components can generate an STA/LTA
trigger. Only these components will be examined by the triggering
algorithm.
components is an integer below 16, whose binary bits represent the
Z (1), N (2), E (4) and auxiliary (8) components respectively as
described above. Issuing 0 TRIGGERS will disable the triggering
system.
When LOWLATENCY is active, this command is used to set the
components which are output as low-latency streams. Issuing 0
TRIGGERS will disable the low latency mode.
GTRIGGERS
Syntax: components GTRIGGERS
Selects which component or components can generate a level trigger.
Only these components will be examined by the triggering algorithm.
components is an integer below 16 with the same meaning as in
TRIGGERS.
S/WTRIGGER
Syntax: S/WTRIGGER
Issues a software trigger, causing the digitizer to trigger immediately,
and begin outputting triggered streams according to its configuration.
TRIGGERED
Syntax: tap components TRIGGERED
Selects which component or components will be output when a trigger
is generated, and at which tap (sample rate).
66 Issue N