Guralp Systems CMG-DM24 User Manual
Page 28
CMG-DM24
Note for v103 Build 78 firmware.
This build displays additional status information on the LCD panel to
show when the USB stick is being written to and when it is not being
accessed.
It is recommended that the memory stick is only removed when the
display shows USB free, which is followed by a bar graph
indicating a 5 second countdown.
The USB device should not be removed while the display shows
USB BUSY WAIT or while it is scrolling the earlier status
information.
When the stick is initially inserted the LCD panel will report, after a
short delay, access to the stick. This is while the system is calculating
the free space available, which may take many tens of seconds.
28
Issue N