Guralp Systems CMG-DM24 - Manual (Page 54)

CMG-DM24
SERIAL2
Syntax: SERIAL2 (interactive)
Sets the serial number for a second sensor (for seven-channel
digitisers) to a value you supply.
SERIAL2
Secondary Serial # {0} ? 6 characters : C90300
The serial number you supply must contain exactly four or six
alphanumeric (0-9A-Z) characters. However, If six characters are
given, the last two are ignored and replaced with zeroes (see the
discussion of serial numbers at SET-ID, above).
SENSOR-TYPE
Syntax: type SENSOR-TYPE
Tells the DM24 which kind of sensor is attached to it. This affects
whether or not the digitizer exposes commands such as locking and
centring.
type can be one of
•
1, for CMG-40T sensors,
•
2, for CMG-3ESP sensors,
•
3, for CMG-3T analogue sensors, or
•
4, for CMG-3TD sensors.
GPS-TYPE
Syntax: type GPS-TYPE
Tells the DM24 which kind of GPS is attached to it.
type can be one of
•
0, if no GPS is available, or
•
2, for attached GPS equipment using the NMEA protocol.
54 Issue N