From-time, To-time, Events – Guralp Systems CMG-DM24 User Manual
Page 85
Operator's guide
FROM-TIME
Syntax: yyyy mm dd hh mm FROM-TIME
Instructs the DM24 to transmit only data more recent than the time
specified by yyyy-mm-dd hh:mm, where:
•
yyyy
is a four-digit year (1989 – 2069);
•
mm
is the month number (1 – 12);
•
dd
is the day of the month (1 – 31);
•
hh
is the hour of the day (0 – 23); and
•
mm
is the minute of the hour (0 – 59).
TO-TIME
Syntax: yyyy mm dd hh mm TO-TIME
Instructs the DM24 to transmit only data older than the time specified
by yyyy-mm-dd hh:mm, where yyyy, mm, dd, hh and mm have the
same meanings as in FROM-TIME, above.
EVENTS
Syntax: event-specification EVENTS
Instructs the DM24 to download only data recorded during triggered
events. event-specification can have several forms:
•
RECENT, to download the most recent events. By default, 16
events are displayed. You can double or halve this number by
prefixing RECENT with either SHORTER or LONGER. You can use
several of these commands, e.g.
LONGER LONGER RECENT EVENTS
will download 64 events. The DM24 remembers this setting, so
a further LONGER RECENT EVENTS would download 128
events.
•
EARLIER, to download the previous set of events, using the
currently-configured length, e.g. if RECENT EVENTS downloads
the 16 events #30 to #45, EARLIER EVENTS will download the
16 events #14 to #29.
October 2009
85