Guralp Systems CMG-DM24 - Manual (Page 115)

Operator's guide
8.3 GPS Port
This is a standard 10-pin “mil-spec” plug,
conforming to MIL-DTL-26482 (formerly
MIL-C-26482). A typical part-number is
02E-12-10P although the initial “02E” varies
with manufacturer.
Suitable mating connectors have part-
numbers like ***-12-10S and are available
from Amphenol, ITT Cannon and other
manufacturers.
The pin-out is the same as the serial output of a DM24 digitizer,
allowing you to insert a CMG-EAM into a pre-existing installation and
maintain connectivity.
Pin Function
A
Power 0 V
B Power +12 V
C 1pps signal
D not connected
E Digitizer console transmit
F Digitizer console receive
G RS232 ground
H Digitizer console ground
J RS232 transmit to GPS
K RS232 receive from GPS
Wiring details for the compatible socket,
***-12-10S, as seen from the cable end.
October 2009 115