Guralp Systems CMG-DM24 User Manual
Page 30
CMG-DM24
control information and display the Control window. The options you
can control immediately are:
•
the type of sensor you are using;
•
GPS power cycling options;
•
the short-term and long-term average values for triggering (but
not which streams perform the trigger, or which are output by
it);
•
the length of pre-trigger and post-trigger periods;
•
calibration signal options; and
•
mass control functions.
Some of these options can also be altered in the Configuration setup
window. For more information on the Control window, see Section 4.2,
page 44.
If you need a more powerful interface to the DM24, you can also issue
commands to it directly using Scream!'s terminal mode. A terminal
window is opened by right-clicking on the digitizer's entry in the list
and selecting Terminal.... The digitizer will stop transmitting data
while you have a terminal window open. Data collected whilst the
terminal is active will be stored for transmission later, memory space
permitting.
The remaining sections of this chapter describe in detail the
configuration options available for the DM24.
30
Issue N