The base dolly – Grip Factory Munich GF-Primo User Manual
Page 7
GF-Primo / GF-Secondo Dolly System Instruction Manual
Page: 6
The Base Dolly
Changing the batteries
The dolly’s’s batteries are connected to the column with a user friendly “drop & go” system.
The column requires 2 x 24Volt Battery units to function.
Centre the battery over the locking mount. Move the battery into position and drop it gently
onto the locking shaft.
Locking shaft & knob
Open the left and right
locking knob to mount the
battery. When in place,
hand tighten the knobs to
secure the battery.
Connecting the Platforms
The Standard Multifunctional Platform Set
The platform set consists of 4 units. Each platform is machined to provide a selection of
threaded (10mm & 3/8”) and non-threaded holes (12, 25 & 28mm).
3 of the units are identical and fit on any of the 3 sides of the dolly. The 4th unit is
machined slightly differently and fits only on the side of the dolly where the steering
gearbox is located.
The carry handle double
functions as a lock for
the platforms. Extend the
handle by pressing the
stainless steel button on
the left side of the wheel
arm. At the same time
pull the handle out.