Grip Factory Munich GF-Primo - Manual (Page 33)

GF-Primo / GF-Secondo Dolly System Instruction Manual
Page: 32
Mode MARKER M
In M-Mode it is possible to activate the recorded MARKERS. Between each MARKER it is
possible to vary direction, speed, and alter the ramp. Upon reaching each of the 6
MARKERS the column will stop automatically.
Explanation of the individual display symbols:
Set MARKERs:
MARKERs that have already been set or recorded are graphically shown beside the lift
range bar on the display.
Current column position and lift range:
The current column position and driven lift range are shown on the lift range bar display.
The available lift range between 2 positions will also be displayed. When MARKERs are
set, the bar display will indicate the available lift range between the MARKERs.
MARK-Button to select required MARKER:
With the MARK-Button it is possible to select the next required MARKER and if needed,
more than one MARKER can be skipped.
Working in M-Mode
In M-Mode up to 6 individually recorded positions called MARKERS can be utilized to
construct the required shot.
The following explains the operation in MARKER-Modus:
After recording the required MARKERs in E-Mode switch to M Mode by pressing the
Program and Mode Selector Button on the underside of the HCU.
Current position and lift range
MARK-Button to select required
MARKER
Currently recorded or set
MARKERs
Lift range bar display