Grip Factory Munich GF-Primo - Manual (Page 35)

GF-Primo / GF-Secondo Dolly System Instruction Manual
Page: 34
Emergency Operation of the Column
The GF-Primo Dolly’s electronic is equipped with a back-up systems to enable movement
of the column in an emergency situation.
Emergency situations are:
o Defective or non-functioning electronic (HCU cannot operate the electronic)
o Defective or lost HCU
Attention:
Emergency operation is not for working with! Using the column with a under
load with mounted camera or camera operators is not allowed!
Attention:
As soon as the emergency switch is activated the column moves with a
preset speed and NO Ramp. Ensure that no equipment or persons are on the
column. Jib arms etc must be dismantled prior to activation of the emergency
switch. Working in emergency mode is not allowed!
To activate the emergency mode proceed as follows:
Using a 2.5mm Allen Key, remove the cover of the emergency switch by
unscrewing the 4 bolts.
Upon removing the cover, 3 multi-point connectors are visible whereby there is a
plug inserted in the top connector. For normal operation the plug must be inserted
into the top connector!
Emergency Switch Cover Connector for normal operation