Grip Factory Munich GF-Primo - Manual (Page 28)

GF-Primo / GF-Secondo Dolly System Instruction Manual
Page: 27
To set MARKERs, Mode E must be selected.
Setting MARKERs in a numerical sequence:
Press the MARK-Button until the digit 1 shows on the display as the currently
selected MARKER.
By using the Rocker Switch drive the column to the required height and stop in this
position.
Now press the ADD-Button, to allocate MARKER 1 to this position.
The digit 2 will show on the display as the next MARKER that can be set.
Again, by using the Rocker Switch drive the column to the required height and stop
in the required next position.
Now press the ADD-Button again to allocate MARKER 2 to this position.
MARKERs 3 to 6 can be selected in the same manner.
Setting MARKERs