Grip Factory Munich GF-Primo - Manual (Page 44)

GF-Primo / GF-Secondo Dolly System Instruction Manual
Page: 43
The front plate of the
jib has 4 threaded
holes
where the
mounting bolt is
inserted depending on
which
platform
position is required.
E.g. for low position.
Screw the mounting
bolt into the lower
hole.
Mount the High/Low
Rig onto the mounting
bolt
Attach the weight
triangle to the rear
of
the arm by
aligning the hole
for the weight rod
over the respective
hole on the rear
arm and inserting
the
weight rod.
Ensure that the
weight rod is the
same length
on
both sides.
Connect the
parallelogram rod into
the parallelogram rod
on the middle section
and secure with the
locking pin.
Connect the
parallelogram rod to
the parallelogram rod
on the weight triangle
and secure with the
locking pin.