Grip Factory Munich GF-Primo - Manual (Page 48)

GF-Primo / GF-Secondo Dolly System Instruction Manual
Page: 47
Before assembling or operating the GF-Primo Jib ensure that the Jib On operational
mode is selected and that the HCU display is showing “Jib On”.
Selecting the “Jib On” mode
DO NOT OPERATE JIB ARMS WHEN THE
”JIB OFF” MODE IS ACTIVE
When operating the GF-Primo Jib observe the following guidelines as well as the
guidelines on page 2 & 3:
1. Know the precise weight that will be placed on the platform i.e. person, camera and
accessories. Do not exceed the maximum payloads i.e. using High / Low Rig maximum
Upon switching on the column,
the display will indicate “Jib
Off” or “Jib On” depending on
the selected mode.
To change mode, enter the
MENU by pressing the RMP
and
SPD buttons
simultaneously.
If the Jib mode is off, as in our
example,
the menu will
indicate JIB MODE ON and
this can be confirmed by
pressing the ENTER button.
Note: If the “Jib Mode Off”
shows on the display this
can
be confirmed by
pressing the ENTER button.