Grip Factory Munich GF-Primo - Manual (Page 13)

GF-Primo / GF-Secondo Dolly System Instruction Manual
Page: 12
GF-Primo Steering modes:
To change from one steering mode to another first of all ensure that all 4 Combi-wheels
are pointing in a straight line as seen from the rear of the dolly
In each of the 4 steering rod mounts you will see 2 notches machined into each rim. The
notches should be in line with the actual gearbox. On the steering mount on the GF-Primo
gearbox you will also find the same markings and these should also be in alignment with
the gearbox. It is only possible to change steering mode when the wheels are aligned in
this starting position. If the wheels are out of position they must be reset as described
below.
Wechsel des Lenkmodus
Steering mode selection
Press steel release pin and
turn the selector
Positioning of the Combi-wheels
and steering rod mount Correct positioning of the steering
rod mount and Combi-wheel