Mode normal n – Grip Factory Munich GF-Primo User Manual
Page 30
GF-Primo / GF-Secondo Dolly System Instruction Manual
Page: 29
Mode NORMAL N
In N-Mode the column can be driven in the selected Ramp RMP and Speed SPD. (To set RMP and SPD see
page 18, Adjusting the Speed or Ramp).
The complete lift range of the column can be used or based on individual requirements the
lift range can be restricted by setting a lower and /or upper limit with the LIMIT-Button.
The following picture shows the display in Normal Mode N upon activation:
Column scale/ position shown in
mm (also available in ft or %)
Motor temperature in
°Celsius
Voltage of columns batteries
Column height / position
RMP = Ramp (sets strength of
acceleration and deceleration of
column: hard
→
00; soft
→
22)
SPD = Speed (sets speed of
columns
travel:
slow
→
00;
HCU Battery status
Limit to restrict the columns lift range
(e.g. from 200mm – 500mm)
Selected User = U1
There is a choice of 4 users.
U1 to U4,
HCU Mode: N=Normal,
E=Enter, M=Markers