Grip Factory Munich GF-Primo - Manual (Page 42)

GF-Primo / GF-Secondo Dolly System Instruction Manual
Page: 41
Error:
Upon switching on the column an incorrect height is shown!
Solution:
Calibrate the column.
If this doesn’t solve the problem and the error is still present, repeat the procedure.
Error:
Display is red:
Solution:
If the display is red it can have a few reasons and in general it is not necessarily an error
but also a signal.
If the display turns red it can mean either
o the connection to the electronic is disrupted.
o the motor temperature is too high.
o the battery voltage is too low.
In these cases
o in wireless mode switch both units to the next higher channel and check if there
is contact between both units.
o Check the load on the column and stop operation to enable the motor to cool
down.
o exchange the batteries and recharge the used batteries.
Technical specifications are subject to change without notice!