Grip Factory Munich GF-Primo - Manual (Page 25)

GF-Primo / GF-Secondo Dolly System Instruction Manual
Page: 24
Adjusting the Speed or Ramp
To adjust the speed or ramp press and hold the respective button and press the Rocker
Switch up or down to adjust and select the required speed or ramp
Generating Movement
For standard work situations where it is required to just move the column up and down and vary speed and
drive ramps, the HCU should be set on either of the 4 Users and the HCU mode N=Normal should be
selected.
To select the HCU Mode
On the underside of the HCU is the HCU Mode Selector Button. Simply press to
scroll through and select the required mode.
Adjusting the Ramp
Adjusting the speed
HCU Mode selector
button. Press to
change from mode N Mode Selector
Mode N=Normal Mode E=Enter Mode M=Marker