Gasboy FuelOmat Payment Terminal - Manual (Page 75)

OrPT Manual 65
6 6 - - 4 4 . . C C L L E E A A N N I I N N G G
6-4.1. General
The OrPT itself as a standalone unit, and the OrPT Box should be cleaned periodically at short
intervals, due to the harsh environment of the forecourt where they operate.
6-4.2. Cleaning
The following instructions are valid for the OrPT front panel, the printer and the OrPT Box.
• Clean the OrPT front panel and other devices with a damp cloth only.
W W A A R R N N I I N N G G
DO NOT use any solvents such as thinner or
benzene to clean the OrPT front panel.
6-4.3. Magnetic Card Reader – Cleaning Instructions
The Card Reader shall be cleaned periodically, preferably once every two (2) weeks, in order to
ensure proper operation. The cleaning purpose is to remove any dust or foreign body that may
harm the reader and consequently prevent the completion of a sale.
Proceed as follows:
• Remove the cleaning card from its packing
• Insert the cleaning card all the way in the Reader, and then pull it out slowly.
• Perform the previous procedures several times, until the card gets dry
• Insert any magnetic card, and verify that its stored data is read by the Magnetic Card
Reader.