Gasboy FuelOmat Payment Terminal - Manual (Page 38)

OrPT Manual 28
Table 3-1. TCP/IP Properties
No. Parameter Name Required Value Default Value
addresses
8 Preferred DNS server address Leave blank Blank
9 Alternate DNS server address Leave blank Blank
e. Click OK to save the settings and close the TCP/IP properties window.
f. Your laptop is now ready to hook up to the station network. Refer to Section 4 for specific
setup instructions.
3 3 - - 6 6 . . L L O O G G I I N N
The Setup of the device can be accessed via the Ethernet port of the device, using a twisted Ethernet
cable between the computer and the device or ordinary LAN cable through the switch.
Once your Ethernet adapter is configured (depending upon system configuration), and the unit to be
set up is connected to a power source, log in to its setup web site as follows:
a. Launch the Internet browser.
b. Enter the IP address of the unit as provided by Gasboy as follows (see Figure 3-4):
http://192.168.1.211 (Ethernet Connection)
Figure 3-4. Entering the Unit’s Web Site
Once a link is established, the OrPT web site window is displayed, as seen in Figure 3-5.