Gasboy FuelOmat Payment Terminal - Manual (Page 28)

OrPT Manual 18
2-10.2. Installation Requirements
z Install the OrPT at the non-hazardous area.
When the OrPT is installed in Islander Plus pedestal, it is inherently considered a non-
hazardous area if the Islander Plus had been installed according to safety requirements (refer
to Gasboy's Document No. MDE - 4811)
z Installation must be conducted by a technician authorized to work in a flammable gas
station environment in accordance with the local requirements and regulations.
z Certify that the required installation preparations have been made:
- Power supply to the OrPT
- Installation location
2-10.3. Installation Kit
The items in the installation kit for an OrPT are listed in Table 2-5.
Table 2-5. OrPT Installation Kit
P/N Description Function Qty.
814942700 CLAMP HOUSING, OrPT PANEL Mounting 1
815200104 SCREW WING M4x10, BOSSARD Mounting 2
2-10.4. Installation Procedure
The OrPT is provided with its holder attached to it.
Perform the following procedure to install the OrPT unit onto the Islander Plus:
a. Disconnect all power sources in installation area, including power source to Gasboy
pedestal.
W W A A R R N N I I N N G G
Conform to all safety regulations regarding working
in gas stations.
b. The OrPT is fed by 24Vdc. Use a stabilized power directly from the Orpak pedestal.
c. Connect all cable plugs to their mating connectors on the OrPT connectors panel, in
accordance with paragraph 2-5 on page 12.