Gasboy FuelOmat Payment Terminal - Manual (Page 52)

OrPT Manual 42
Display Manufacture – N/A
Smart Card Sam
Parameter Name Required Value Remark
Type Type of device Select in combo box OrPT
General I/O
Parameter Name Required Value Remark
Type Type of device Select in combo box OrPT
f. Click the Submit button to enter the selected system recovery attempt parameters in the
configuration of the device.
g. Click the Save Setup tab in the top Navigation Bar for the final step in the setup procedure.
The Save Setup window is displayed
4-1.4. Saving the OrPT Setup
Up until now, all the changes you have made to the device’s settings were saving temporarily on the
RAM. The Save Setup window is used for permanently saving the changes you have made in the
device’s Flash memory.
To Save the Setup parameters, perform the following procedures (see Figure 4-5 to Figure 4-7):
a. Access the Save Setup window by clicking the Save Setup tab in the top Navigation Bar.