Gasboy Fuel Truck Controller - Manual (Page 81)

Fuel Truck Controller Manual 75
Can’t read the
vehicles and/or
no authorization
at the pumps
Check the
programming of the
WNRs
3. Connect to the Wireless
Gateway through the 9-pin
serial port and open
Hyperterminal (115200, 8,
None, 1, None), reset the
Wireless Gateway and
follow the startup messages
to find the IP address.
5 5 - - 3 3 . . C C L L E E A A N N I I N N G G
The Fuel Truck Controller itself as a standalone unit should be cleaned periodically at short
intervals, due to the harsh environment where they operate.
CAUTION
DO NOT use any solvents such as thinner or
benzene.