Daktronics Venus 1500 Ver 2.x - Manual (Page 26)

Editing a Display’s Configuration
To modify the settings of an existing display or display group, either right-click on a display or
group name at the left side of the screen, and then click on Edit… on the popup menu, or activate
the Edit pull-down menu and select Edit, and then Display (to edit a single display) or Display
Group (to modify a group). The appropriate configuration dialog box appears. Edit the
information as needed.
Deleting a Display from the Network
To remove a display or group, right-click on the name at the left side of the screen, and then click
on Delete on the popup menu. A dialog box appears requesting a confirmation of the deletion.
Click on [
OK ] to delete the display or group or [ CANCEL ] to leave it.
4.8 Enabling the Text Filter (Profanity Protection)
The Venus 1500 software’s text filter
prevents specified words from
appearing on the display(s).
To enable or modify this filter, activate
the Venus 1500 Administrator Edit
pull-down menu, and select Message
Text Filter.
Two filters can be enabled, the Default
Filter and the Custom Filter.
The default profanity filter protects
against words identified in the FCC vs.
Pacifica Foundation (438 U.S. 726
[1978]) legal case. The custom filter
protects against words identified by the
operator.
To enable protection against words in either filter, click on the box next to the desired filter. A check
mark indicates the filter is turned ON.
Adding New Words
To add new words to the custom filter feature, type the new word in the box titled Add New
Entry. Click on [
ADD ]. The word is added to the box below.
Removing a Word
To remove a word from the list, highlight the desired word and then click on [
REMOVE ]. It is
immediately deleted.
Click on [
CLOSE ] to return to the Venus 1500 Administrator.
The Venus 1500 Administrator 4-8