Cybex 525AT Arc Trainer - Manual (Page 55)

55
Cybex Service Manual
Remove front cover
1. Remove the four short screws and one long screw securing the front cover and iPad clip to the
console assembly using a Phillips screwdriver.
2
1
3
4
Description
1 Console assembly
2 Short screws (4)
3 iPad clip
4 Long screw (1)
2. Tilt front cover forward.
3. Unplug cables from the MCC board by un-latching connectors with the following procedure:
A. Press in the top of the cable connector.
1
Pull Straight Out
From Connector
DO NOT PULL
CONNECTOR OUT
BY THE WIRES!
Description
1 Latch
B. Ensure the latch disengages the connector.
C. Unplug cable by holding down the latch and pulling straight out from the connector. Do not
pull on wires, remove by connector.