Cybex 525AT Arc Trainer - Manual (Page 30)

30 31
Cybex Service Manual
Install Linkage Rod
1. Place linkage rod in correct position.
4
3
5
5
4
2
6
2
3 1
Description
1 Lingake rod
2 SCHS
3 Flat washer
4 Cap
5 Spacer
6 Loctite
2. Place a drop of loctite on the SHCS and place another drop of loctite into the shaft (where the
SHCS will be tightened into).
3. Install spacers, caps, flat washers, SHCS. SHCS must be tightened to a minimum of 90 lbs-in.
Complete installation
Operate the unit at all levels to verify proper operation.
Arm Handle
Tools Required
• 3/16” Allen wrench
• 7/32” Allen wrench (2)
• Torque wrench
Remove heart rate cable
Unplug heart rate cable from socket in frame.
2
1
Description
1 Socket in frame
2 Heart rate cable