Cybex 525AT Arc Trainer User Manual
Page 14
Cybex Service Manual
14
The Statistics menu includes: Miles/Km, Hours, Starts, and Error log.
5. The first menu item is Miles/Km.
6. Record Distance.
7. Navigate to menu item Hours.
8. Record Hours.
9. Navigate to menu item Error log.
10. Record Errors.
11. Exit Statistics menu by
pressing the
STOP key.
First 500 Miles (800 KM)
Follow this procedure to ensure the belts are tensioned properly and in good condition.
1. Unplug the unit from the power outlet.
2. Remove access cover. (See previous procedure Remove Access Cover)
3. Pull down and roll each belt to examine the condition. If a belt has cracks or appears worn, it
must be replaced immediately by a qualified service technician.
4. Attach access cover. (See previous procedure Attach Access Cover).
5. Plug the power cord into a power outlet.
Every 5000 Miles (8000 KM)
Check drive belts for tension and wear. (See procedure First 500 Miles)
Move unit and vacuum underneath. Lift the rear of unit and roll it back from its present
position. Vacuum underneath and return unit to normal position.
Clean inside unit.
1. Unplug the unit from the power outlet.
2. Remove access cover. (See previous procedure Remove Access Cover)
3. Clean the exposed components using a vacuum cleaner attachment or hand vacuum.
4. Remove dirt and debris from internal components.
5. Using a dry cloth, wipe all exposed areas.
6. Attach access cover. (See procedure Attach Access Cover).
7. Plug the power cord into a power outlet.
Every 20,000 Miles (32000 KM)
Contact qualified service technician to check elevation assembly, replace any worn parts and
lubricate elevation bushings.