Cybex 525AT Arc Trainer - Manual (Page 43)

43
Cybex Service Manual
Remove left shroud
1. Remove the eight screws securing left shroud using a Phillips screwdriver.
1
2
Description
1 Screws (8)
2 Left shroud
2. Remove left shroud.
Unplug incline motor cable
1. Loosen the top two screws and remove the bottom two screws using a phillips screwdriver.
4
3
6
2
5
1
Description
1 Top screws
2 Incline motor cable
3 Controller cover
4 Bottom screws
5 Control board
6 Cable tie
2. Remove the controller cover.
3. Unplug incline motor cable from control board.
4. Cut wire tie using side cutters.