Cybex 525AT Arc Trainer - Manual (Page 26)

26 27
Cybex Service Manual
Arm Handle Linkage
Remove Arm Handle Linkage
1. Remove SHCS, flat washer, cap, and spacer securing arm handle linkage using a 3/16” Allen
wrench.
5
4
3 2
1
7
6
Description
1 Arm handle linkage
2 Spacer
3 Cap
4 Flat washer
5 SHCS
6 Hole (not shown)
7 Handle
2. Remove arm handle linkage from handle.
Foot Plate Assembly
Remove Foot Plate Assembly
1. Remove both SHCS and washers securing foot plate using a 3/16” Allen wrench.
1
3
2 4
5
Description
1 Rear foot plate shaft
2 SHCS
3 Washer
4 Foot plate
5 Front foot plate shaft
2. Remove foot plate from front and rear foot plate shafts.