Cybex 525AT Arc Trainer - Manual (Page 13)

Cybex Service Manual Cybex Service Manual
13
E3 View Monitor
Cleaning
1. Unplug power cord from the wall socket.
2. Dust off the panel with a soft dry cloth as needed. The screen can be cleaned with computer
screen wipes or other non-abrasive, moist, disposable wipes.
Storage or Long Non-Use Periods
When not using product for an extended period of time the product should be disconnected from the
Power Supply, TV/Cable Signal Feed, and any Peripheral Devices.
Pixels
Very small red, blue, white or green spots may be visible or may appear on the screen. This is a
characteristic of liquid crystal display panels and is not a faulty condition. The liquid crystal panel is
built with very high precision technology giving fine picture details. Occasionally, a few non-active
pixels may appear on the screen as a fixed point. This does not affect the performance of monitor or
merit a warranty claim.
Maintenance
•
It is very important to have the unit regularly examined by a qualified technician to ensure the
product is fit for use.
• If the unit malfunctions, please refer to a qualified technician for repair or replacement of defective
parts immediately. Do not attempt to use the monitor until it has been inspected and repaired by a
qualified technician.
• For inspection, installation and servicing, please consult qualified technician.
• Failure to use a manufacturer approved repair technician may void any warranty claims.
Recommended Service Schedule
All maintenance activities shall be performed by qualified personnel. Failure to do so could result in
serious injury.
This is the minimum recommended service.
Determine distance
1. Verify foot plates are completely stopped.
2. Grasp handrail and step carefully onto foot plates. Begin striding.
3. Press and the hold the Display option and DOWN keys for 3 seconds. A beep
signifies the first screen of the Statistics menu.
4. Press the UP and DOWN keys to scroll up and down in the statistics menu.