Cybex 525AT Arc Trainer - Manual (Page 32)

32 33
Cybex Service Manual
Install linkage arm
1. Place a drop of loctite on the SHCS and another drop in shaft where the SHCS will be
tightened into.
5
1
7
6
2
4
3
Description
1 Loctite
2 Cap
3 Arm handle
4 Linkage arm
5 Spacer
6 Flat washer
7 SHCS
2. Install linkage arm, spacer, cap, flat washer, and SHCS to arm handle.
3. Tighen SHCS securely. SHCS must be tightened to a minimum of 90 lbs-in.
Install heart rate cable
Plug heart rate cable into connector in frame.
2
1
Description
1 Socket in frame
2 Heart rate cable
Complete installation
1. Operate the unit at all levels to verify proper operation.
2. Hold the hand grips on the console handrail until a heart rate is displayed, typically less than
thirty seconds.