Cybex 525AT Arc Trainer - Manual (Page 21)

21
Cybex Service Manual
3. Press the ENTER key once to enter setup values. Press again to save any changes
and advance forward in the menu.
The Setup options are:
LED Console E3 View Monitor
Time Set time display format AM, PM, or 24. Set time in Hours and Minutes HH:MM.
Date Year format is Y - Year [YYYY]. Date format is [YYYY] [MM] [DD]. Y -
Year, M - Month, and D - Day. Month format is M - Month [MM].
Day format is D - Day [DD].
Weight and
Distance Units
LbS - Pounds, Kg - Kilograms or
Ston - Stone.
MI - Miles or KM - Kilometers.
LBS - Pounds, Kg - Kilograms or
Stone - Stone.
MI - Miles or KM - Kilometers.
Pause Set time length for Pause. OFF (Default), 1:00, 5:00 or 10:00 minutes.
Max Time Set maximum workout time. OFF (Unlimited), 20, 30, 60 (Default), or 120
minutes.
Default Time Set default workout time. 30, 60 (Default), 90, 120 miutes, off. or club*.
Max Time Set maximum workout time. OFF (Unlimited), 20, 30, 40, 50, 60 (Default), 90 or
120 minutes.
Tone Toggle console beeper On (Default) or OFF.
Dormant Style Not available Default, Default with time (Clock
shown), Heart only or Energy Saver
(All LED’s off except for center dashes
on membrane.
A/V Set A/V option. Choices are PEM, UHF, none, or FM (TF/M). See A/V Config
and FM Radio Presets for full configuration. If unit ships with E3 View Monitor,
this setup option is skipped.
*Club setting limits the workout time to 60 minutes during peak times. Peak times are 5:01 AM to
9:00 AM, and 4:01 PM to 9:00 PM
To reset setup options to default values
1. Press the Display option key at the first setup option screen (Time). The console will
display “[rSEt] [? ]“.
To exit without resetting, press the STOP or ENTER key.
2. To reset setup options, press the UP and DOWN keys to select “[YES]” and press the
ENTER key.
Exit Set Up Mode.
1. Press the STOP key to exit Setup options.