Cybex 525AT Arc Trainer - Manual (Page 28)

28 29
Cybex Service Manual
Install Rear Foot Plate Arm
1. Position new rear foot plate arm in place.
2
3 4
5
1
Description
1 Front foot plate arm
2 Spacer
3 Cap
4 BHSCS
5 Loctite
2. Place a drop of Loctite on the BHSCS and another drop inside the shaft into where the BHSCS
will be tightened.
3. Install BHSCS, cap, and spacer to rear foot plate arm using a 7/32” Allen wrench. BHSCS must
be tightened to a minimum of 250 lbs-in.
Install Front Foot Plate Arm
1. Position front foot plate arm in place.
2
3 4
5
1
Description
1 Front foot plate arm
2 Spacer
3 Cap
4 BHSCS
5 Loctite
2. Place a drop of Loctite on the BHSCS and another drop inside the shaft into where the BHSCS
will be tightened.
3. Install BHSCS, cap, and spacer to front foot plate arm using a 7/32” Allen wrench. BHSCS
must be tightened to a minimum of 250 lbs-in.