Comtech EF Data PCB-4000 - Manual (Page 61)

PCB-4000 1+1 Phase Combiner Revision 2
Serial Remote Control MN/PCB4000.IOM
5–13
Parameter
Type
Command
(Instruction
Code and
qualifier)
Command
Valid for
PCB or
SSPA
Arguments for
Command or
Response to
Query
Description of Arguments
(Note that all arguments are ASCII numeric codes – i.e.,
ASCII codes between 48 and 57)
Response to
Command
(Target to
Controller)
Query
(Instruction
Code and
qualifier)
Query Valid
for PCB or
SSPA
Response to
Query
(Target to
Controller)
Set RTC Time TIM= ALL 6 bytes,
numerical
Command or Query.
A command in the form hhmmss, indicating the time from
midnight, where hh = hours, between 00 and 23; mm = minutes,
between 00 and 59, and ss = seconds, between 00 and 59
Example: TIM=231259 would be 23 hours, 12 minutes and 59
seconds past midnight. TIM =
TIM?
TIM * TIM?
ALL TIM=xx
(see Description
of Arguments for
details)
Retrieve
Number of
unread
Stored Alarms N/A N/A 2 bytes,
numerical
Query only.
Returns the number of Stored Events which remain unread, in
the form xx.
Example reply: TNA=18 N/A TNA? SSPA TNA=xx
(see Description
of Arguments for
details)