Comtech EF Data RCF6001 - Manual (Page 54)

ODU Installation RCF6001 Satellite Terminal
Page 5-8 TM082 - Rev. 1.0
Interface Connections for the 1, 2, or 4 Watt ODU (BUC)
The following describes the various “USER” connections located on the 1-Watt, 2-
Watt, or 4-Watt ODU (BUC).
1. WR75 Waveguide Flange, Grooved
Function: ODU (BUC) RF Output port
2. WR75 Transmit Reject Filter
(Optional)
Function: Ku-Band RF Connection to
Reject Filter
3. Male Type “F” Female Connector
Function: LNB Interface for L-Band
Output connection to IDU
BUC3.VSD
5
4
LNB
1
7
3
6
8
2
Step 13. Provides +15 Vdc source for LNB from IDU.
Step 14. Refer to Section 5.2, IFL Cable Installation Guidelines.
Step 15. Refer to Section 5.2.1, General Cable Installation Considerations prior to installing the
cable.
Step 16. Refer to Table 5-2, IDU to ODU Interface Cable Requirements.
4. Female Type “N” Connector
Function: ODU (BUC) Interface for L-Band Input connection from IDU
Receives the modulated L-Band (950 - 1450 MHz) signal from IDU.
Interface for a 10 MHz reference, 48 Vdc power, and an FSK monitor and control
(M&C) link.
Refer to Section 5.2, IFL Cable Installation Guidelines.
Step 17. Refer to Section 5.2.1, General Cable Installation Considerations prior to installing the
cable.
Step 18. Refer to Table 5-2, IDU to ODU Interface Cable Requirements.