Comtech EF Data CDM-625A - Manual (Page 404)

CDM-625A Advanced Satellite Modem MN-CDM625A
Telnet Command Line Interface (CLI) Operation Revision 3
9–26
9.3.3.3 Home > Modem > Modem RX
Open the Modem RX page from the Modem submenu. This page contains the following options:
Hot
Key Dialog Window
Option Entry
A
Rx FEC Type
Use the ↑↓ arrow keys to select:
• None Diff Enc On • Viterbi • Viterbi Reed-Solomon
• Sequential • Sequential Reed-Solomon • TCM
• TCM Reed-Solomon • TPC • None Diff Enc Off
• LDPC • VersaFEC • ULL
• VersaFEC-2 Long Block • VersaFEC-2 Short Block
B Rx Mod Type
Use the ↑↓ arrow keys to select:
• BPSK • QPSK • OQPSK
• 8PSK • 16QAM • 8QAM
C Rx FEC Code Rate
Use the ↑↓ arrow keys to select the Rx FEC Code Rate.
See the table provided in Sect. 6.2.1.4.4 CONFIG: Rx

Demod
(Chapter 6. FRONT PANEL OPERATION) for the list of
available FEC Rate Choices.
D Rx Data Rate
Enter a value from 18.000 to 25000.000 Kbps
Data Rate applies only when not in ACM Mode
E Rx Symbol Rate
Enter a value from 18.000 to 25000.000 Ksps
Symbol Rate applies when in ACM Mode