Comtech EF Data CDM-800 - Manual (Page 83)

CDM-800 Gateway Router Revision 1
Ethernet-based Remote Product Management MN-CDM800
5–23
• Index (read‐only) – This is the internal table index and it cannot be edited.
• IP – Entry IP Address, format XXX.XXX.XXX.XXX.
• MAC – Entry MAC Address, format YY:YY:YY:YY:YY.
• Type (read‐only) – The entry Type is identifiable as Static or Dynamic and cannot be edited.
Make the desired IP and MAC Address edits. Click [Submit Changes] to save.
5.4.4.3.4 Configuration | Routing | Routes
Use this page to enter static routes for IP traffic over the satellite or to another device on the
LAN.
Figure 5‐13. Configuration | Routing | Routes page
Add New Route
Use this section to directly add a Route Table entry:
• Index (read‐only) – This is the internal table index that is automatically assigned and cannot
be edited.