Comtech EF Data CDM-800 - Manual (Page 44)

CDM-800 Gateway Router Revision 1
Rear Panel Connections MN-CDM800
3–8
3.2.4 Utility Connector Group
3.2.4.1 ‘TERM’ Connector
This RJ‐12 female modular jack is unused at this time.
3.2.4.2 ‘FE’ (Fast Ethernet) Connector
• This interface operates at 10/100 Mbps, half and full duplex, auto‐negotiating.
• The maximum Ethernet packet size is 1522 bytes (including Ethernet headers and
CRC)
3.2.4.3 ‘REDUNDANCY’ Connector
Connector Type Name Direction
Type ‘D’ 9‐pin female REDUNDANCY In/Out
This interface is used for connection to an optional CEFD CRS‐170A 1:1 Redundancy
Switch for L‐Band operation, or the CRS‐180 1:1 Redundancy Switch for 70/140 MHz
operation.
M:N device redundancy support is available with the separately purchased Vipersat
Management System (VMS).
Table 3-1. REDUNDANCY Connector Pinout
Connector Type Name Direction
RJ‐45 female modular jack FE In/Out
PIN # DESCRIPTION DIRECTION
1 GROUND –
6 TRANSMIT SERIAL DATA – AUXILIARY CHANNEL OUT
2 RECEIVE SERIAL DATA – AUXILIARY CHANNEL IN
7 REDUNDANCY OUT 1 OUT
3 REDUNDANCY IN 1 IN
8 REDUNDANCY OUT 2 OUT
4 REDUNDANCY IN 2 IN
9 FUSED +12 VOLT OUT
5 REDUN_TX_EN OUT